Merry meet all,

Today I want to share with you how I sewed a Victorian nightgown. 

I bought a pdf pattern from Stella Pattern on Etsy. I usually use a regular tissue pattern, but this time I bought a pdf pattern. I knew I could never get the pattern I wanted from McCalls or Vogue patterns, certainly not a Victorian nightgown pattern. I downloaded the files and read them carefully. I wish the seller told me how much fabric I required for the pattern. That would have been helpful. Here is the link for the pattern I bought on Etsy – 

https://www.etsy.com/ca/listing/1831703923/victorian-nightgown-sewing-pattern?ref=yr_purchases

The construction of the Victorian nightgown had some unforeseen challenges.  I bought 4.5 meters of yellow eyelet cotton, 100% cotton, on sale. 

I downloaded a pattern size, which turned out to be the wrong size. I used size 14, when I should have used a 16 or 18. Our bodies change as we age. I needed to make adjustments to the pattern. The pattern consisted of two long front and back pieces, the neckline facing, sleeves and sleeve flounce and hem flounce. I cut out the pattern at the library and that was not a good thing. It was not till I did a fitting that I realized the body of the nightgown would be too tight on me. Okay I altered the armholes after checking that out in a vogue sewing book. I cut into the armhole seam, basted the sleeve in and then basted the sleeve in twice, and then decided how much more I needed to cut into the armholes. I did not trim the seam, but I did cut into the seam and clipped the seam to make the armhole have more room to fit my arm. That would make the whole nightgown more roomy and comfortable for me, which a nightgown should be. I may need to alter the neckline facing. 

I cut out the flounce for the sleeves twice. The second time I cut out the sleeve flounce correctly. The pattern says to cut out on a fold. I am so happy that I cut it out again -which is why it is a good idea to always have more fabric. It is easier to make something larger, rather than smaller. The sleeve flounce needs to have that fullness. 

So once that was done, and I was happy with how the nightgown felt on me, I permanently set in the sleeves. When you are constructing the nightgown or any other sewing project, that is the best time to make the alterations. Not when you are done sewing, because you are not truly done. I got distracted when I cut out the front and back pattern pieces, and ended up having to sew the front piece center section together, which was supposed to open on a fold. Oops! I made a very slim seam allowance and with the arms not fitting earlier, I was glad I did. That meant more room for me. 

The fabric is very delicate. I stitched slowly and carefully. I know sewing machines can sew fast, but I chose sewing carefully. The end result is the nightgown looks great. 

I decided that the best way for me to know the front from the back was the slim seam allowance in the center front pattern piece. The back center section has a slightly wider seam allowance. 

I sewed the neckline facing, and I set in the sleeves and I sewed the flounce. The flounce intimidated me. I had to figure out how to sew the two big sections together. There was a front and a back, but by the time I figured out how to sew the front and back together, and stay stitch and hem the flounce,  I could no longer figure out back from front. I pinned the flounce right sides together. I stitched the flounce to the nightgown hem and pressed it. I clipped the seam allowance, pressed the seam allowance and checked the flounce and the hem. There were two spots where the fabric was caught in the flounce or a hole in the seam, but I quickly fixed those issues. 

The eyelet cotton was very easy to work with. I stitched a zigzag stitch into the center back seam allowances and the arm and arm flounce pieces. The eyelet cotton  material is very light and delicate. I did not want it to fray or unravel. I did my best to whip stitch the seam allowance for the arms. The zig zag stitch was a huge challenge, because the seam allowances are narrow and the fabric is fragile, but I managed. I snipped the stray threads.

Next, I want to line the nightgown. I have to mimic the nightgown pattern, but I will manage. I always wash the fabric first to eliminate the formaldehyde preservatives the stores use on the fabric to extend the fabric shelf life in the store. I will then cut out the pattern, except I am not making another flounce, neckline stitch or sleeves. I just don’t want the nightgown to be so see through. 

I bought white thread to correspond with the white lining material, which I also bought on sale at Fabricville. The eyelet cotton was 66.67% off, so instead of paying $90 for the fabric (unreal!), I paid $40. That and the threads and the lining material, this took 3 days to sew and cost me $50! It is sewn correctly and neatly and will always just fit me. The zig zag stitch ensures it won’t unravel or fray too much. I set in the sleeves three times before I was happy with the fit. 

I washed and dried the fabric. They put formaldehyde in the fabric to give it a longer shelf life in the fabric store. Now I just have to make sure the fabric is on the grain and start cutting! 

Once I am done sewing the lining together, I have to sew it to the nightgown. The pattern is always sewn right sides together. I have two meters of fabric, so the lining will be easy to do. I just have to keep in mind the alteration I did to the nightgown and do that to the lining or just add an extra inch to the whole pattern. I am sure it will be lovely. 

Today I tried – tried being the key word there, to make a lining. I seam ripped the neckline facing. I sewed the neckline again and this time I did it correctly. The nightgown is now done. I will check tomorrow for any small touch ups that need to be done, but it is complete and correct. I think the victorian nightgown looks great. It fits true to me. It is just beautiful.  

Does this inspire you to sew your own nightgown? I hope so.

Blessings, Spiderwitch )O(